HLD T700 ALU tape
Product Description
| PRODUCT NAME | Aluminum flashing tape ( Bitumen type ) |
| THICKNESS (mm) | 1.0mm 1.2mm 1.5mm 1.8mm 2.0mm |
| WIDTH(cm) | 5cm 7.5cm 10cm 15cm 20cm 30cm ... 100cm |
| LENGTH(m) | 2.5m 3.0m 8m 10m 15m 20m (Normal:10m per roll) |
| Isolation paper | PE film / Wax paper / PET film...... |
| Top surface | Aluminum foil / PE film / Sand / HDPE film...... |
| Product feature | 1)Self adhesion without bonding agent or torch. 2)Good rubber elasticity and elongation. 3)Excellent adhesion bond 4)Good self-healing 5)Cold&easy application, no pollution 6)Corrosion-resistance / aging-resistance 7)Available for wet ground 8) Aluminum flashing tape ( Bitumen type ) |
| Application | General: Sealing around pipes and tanks, repairs to weatherproof enclosures, sealing over wood, concrete brick most metals and some plastics.Vehicle/ships maintenance and repair, Hatch cover sealing, Sound damping Construction: Flashing & Sealing to felt asphalt and bitumen surfaces, flashing of conservatories andporches, roof skirtings and parapet joints, sealing of roof light, windows,door,vents, pipes, and other openings, repair bandage for gutters and roofs, sealing glazing bars, cappings and protective coverings. |
| Storage | Store the rolls in dry conditions with +5 dg C --- 25 dg C with original packaging. Shelf-life approximately 12 months. Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen. |
| Surface preparation | Surfaces must be clean of dirt loose material, grease and oils. Rough or porous surfaces must first be treated with Bitumen Primer. |