Twin Sided Adhesive Bitumen Tape HLD T400

Twin Sided Adhesive Bitumen Tape HLD T400 is mainly used as an adhesive for the fixing of protecting boards to the range of self adhesive waterproofing membranes.

Twin Sided Adhesive Bitumen Tape HLD T400 is also ideal for sealing of pipe joints in concrete structures and other corner joints.

APPLICATION INSTRUCTIONS:

The substrate to which Twin Sided Adhesive Bitumen Tape HLD T400 needs to be applied should be free of oil, water and dust. the presence of any of these contaminants affects the adhesive properties of the membrane.

Cut the membrane into the desired width and length and stick it on to the surface. Remove the release film form the order side and then stick the boards on place.

HANDLING

Twin Sided Adhesive Bitumen Tape HLD T400 are supplied in rolls of 10 m length and 50 mm width. The membranes can be unloaded by hand or other convenient means, but making sure the absence of any protruded sharp edges nearby to avoid punctures.

STORAGE

Twin Sided Adhesive Bitumen Tape HLD T400 range of tapes have to be stored in a shaded are on wooden pallets neatly covered by any thick fabric like tarpaulin sheets tied and secured properly to ensure no excessive exposure to sunlight.

DISPOSAL

Twin Sided Adhesive Bitumen Tape HLD T400 is a non-hazardous, non-flammable material and therefore can be disposed to in any regular disposal areas.

Twin Sided Adhesive Bitumen Tape HLD T400 should be disposed on after wrapping with paper, plastic or clothe as the modified material has tendency to soften under heat and pressure, which would make further handling very tough.

HEALTH AND SAFETY

Twin Sided Adhesive Bitumen Tape HLD T400 contains a tacky Bitumen compound which while applied can adhere to human skin.

Such stains of Bitumen can be removed by using a cloth dipped in light solvents. In case the effected area is sensitive like the eye please contact the company physician for advice.

TECHNICAL PROPERTIES: