Availability: | |
---|---|
Quantity: | |
T800
HLD
Visco Elastic Tape for The Pipeline Anticorrosion
System Description
Visco Elastic Tape for the Pipeline Anticorrosion is a non cure, cold applied corrosion prevention wrap adhering extremely well to the plant coating PE, PP, FBE and irregular equipment such as flanges, valves, pipe fittings, rings, manhole etc.
Visco-elastic tape can cold flow into all irregularities of the substrate and self healing of the complete coating system.
Product Composition
Visco-elastic tape is based on a compound that consisting of non-crystalline, low-viscosity, non-crosslinked ( fully amorphous ), non-reactive polyisobutene.
Product Features
Primer free.
Inert to ageing and weathering
Constant thickness and conforms to irregular shapes.
Resistance to low temperatures without getting brittle
100% coverage rate, it is completely waterproof and anti corrosion.
Environmentally friendly ,no health and safety hazard to humans
Resistant to many chemicals like water ,salts ,acids .alkalis ,polar solvents etc
Ordering Information
HLD visco-elastic tapes are available in rolls.
Product Type | Standard Ordering Options |
Tape Thickness | 1.8mm、2.0mm |
Tape Width | 50mm、100mm、150mm or others |
Tape Length | 10m、15m、20m、30m or others |
Tape Color | Green or others |
Core diameter | 76mm or others |
Product Properties
Item | Test method | Performance |
Color | green | |
Density | 1.4 g/cm3 | |
Thickness | ASTM D1000 | ≥1.8mm |
Peel Strength to steel(23℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Peel Strength to PE(23℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Peel Strength to Steel(-45℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Shear Strength to Steel(23℃) | EN 12068 | ≥0.02MPa |
Coverage Rate | ≥95% | |
Shear Strength to Steel(-45℃) | EN 12068 | ≥0.02MPa |
Coverage Rate | ≥95% | |
Specific Insulation Resistance | EN 12068 | ≥108 Ω.㎡ |
Dielectric strength | DIN 53481 | ≥10kv/mm |
Water Absorption | ASTM D 570 | <0.03% |
Cathodic Disbandment | EN 12068 | ≤20 mm-rad |
Drip Resistance @85 ℃ for 72 hours | No dripping | |
Heat aging (100d, 90℃) | Coverage Rate≥99% | |
Chemical Resistance(90d ,10% HCL) | No Change | |
Chemical Resistance (90d,10%NaOH) | No Change | |
Chemical Resistance (90D, 3%NaCL) | No Change | |
Hot water immersion @60℃ for 120 days | No Change | |
Operational Temperature Range | -45℃~80°C |
Visco Elastic Tape for The Pipeline Anticorrosion
System Description
Visco Elastic Tape for the Pipeline Anticorrosion is a non cure, cold applied corrosion prevention wrap adhering extremely well to the plant coating PE, PP, FBE and irregular equipment such as flanges, valves, pipe fittings, rings, manhole etc.
Visco-elastic tape can cold flow into all irregularities of the substrate and self healing of the complete coating system.
Product Composition
Visco-elastic tape is based on a compound that consisting of non-crystalline, low-viscosity, non-crosslinked ( fully amorphous ), non-reactive polyisobutene.
Product Features
Primer free.
Inert to ageing and weathering
Constant thickness and conforms to irregular shapes.
Resistance to low temperatures without getting brittle
100% coverage rate, it is completely waterproof and anti corrosion.
Environmentally friendly ,no health and safety hazard to humans
Resistant to many chemicals like water ,salts ,acids .alkalis ,polar solvents etc
Ordering Information
HLD visco-elastic tapes are available in rolls.
Product Type | Standard Ordering Options |
Tape Thickness | 1.8mm、2.0mm |
Tape Width | 50mm、100mm、150mm or others |
Tape Length | 10m、15m、20m、30m or others |
Tape Color | Green or others |
Core diameter | 76mm or others |
Product Properties
Item | Test method | Performance |
Color | green | |
Density | 1.4 g/cm3 | |
Thickness | ASTM D1000 | ≥1.8mm |
Peel Strength to steel(23℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Peel Strength to PE(23℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Peel Strength to Steel(-45℃) | ASTM D1000 | ≥5N/cm |
Coverage Rate | ≥95% | |
Shear Strength to Steel(23℃) | EN 12068 | ≥0.02MPa |
Coverage Rate | ≥95% | |
Shear Strength to Steel(-45℃) | EN 12068 | ≥0.02MPa |
Coverage Rate | ≥95% | |
Specific Insulation Resistance | EN 12068 | ≥108 Ω.㎡ |
Dielectric strength | DIN 53481 | ≥10kv/mm |
Water Absorption | ASTM D 570 | <0.03% |
Cathodic Disbandment | EN 12068 | ≤20 mm-rad |
Drip Resistance @85 ℃ for 72 hours | No dripping | |
Heat aging (100d, 90℃) | Coverage Rate≥99% | |
Chemical Resistance(90d ,10% HCL) | No Change | |
Chemical Resistance (90d,10%NaOH) | No Change | |
Chemical Resistance (90D, 3%NaCL) | No Change | |
Hot water immersion @60℃ for 120 days | No Change | |
Operational Temperature Range | -45℃~80°C |